Product Category

Granulation Equipments

Rapid Mixer Granulator (RMG)

The Rapid Mixer Granulator performs dry blending and wet crushing with specially designed mixer and chopper blades.

Fluid Bed Dryer (FBD)

Fluid Bed Dryer works by creating fluid turbulence in wet granulated or powdery product using hot air flowing upward.

Fluid Bed Processor (FBP)

Fluid Bed Processor performs drying, granulation, and coating in a single machine with controlled airflow and precise process parameters.

Auto Coater

Propel Auto Coater is a high-performance pharmaceutical coating system designed for uniform coating of tablets, pellets, and granules.

Conventional Coater

Conventional Coating Pan is used for coating tablets and drying them simultaneously with controlled hot air from the blower.

Extruder & Spheronizer

The Propel Combo Extruder & Spheronizer is an integrated pelletization system for uniform, spherical pellets.

Rapid Mixer Granulator (RMG)

The Rapid Mixer Granulator (RMG) performs dry blending and wet crushing by the essential plan of the exceptional three/four arms of the blending impeller and successions of the blending procedure in the barrel-shaped blending drum to be adjusted to associate with the base plate, accomplishing another embellishment.

Salient Features

Mixing of substances uniformly and homogeneously with special design Mixer & Chopper blades
Modular Design (In compliance with cGMP guidelines)
Electro-Pneumatic Operated Discharge Effective sealing
Continuous air purging through drive shaft to avoid product spilling
Easy to clean machine
Fully Automatic Operation through PLC System

Optional Features

Jacketed type Pot
Davit Arm Type Lifting & Swivelling
Flame Proof Construction
In-line Cone-Mill at Discharge

Technical Specification

Model	RMG 25	RMG 100	RMG 200	RMG 300	RMG 400	RMG 600	RMG 800	RMG 1000
Gross Capacity - Ltrs	25	100	200	300	400	600	800	1000
Working Capacity - Ltrs	20	80	160	240	320	480	640	800
Impeller Motor Capacity (HP)	3 or 5	10	20	30	40	50	60	75
Chopper Motor Capacity (HP)	1.5	3	5	5	7.5	10	12.5	15
Total Power In HP	6.5	13	25	35	47.5	60	72.5	90
Electric Supply	415 V, ±10%, 3Ø, 50Hz
Net weight (Approx. in KGs)	250	1000	1300	1800	2300	3000	3500	4000

Fluid Bed Dryer (FBD)

Fluid Bed Dryer works on the principal of creating a fluid turbulence in a granulated or powdery wet product by means of hot air (or dehumidified air) flowing in an upward direction and drying the product to the required degree.

Salient Features

Short drying time and Low drying temperature.
Uniform drying.
Single piece retarding chamber and finger bag chamber with inflatable gasket.
Electric / Steam / hot water circulation - air heating system with SS heat exchangers.
Fully automatic bag shaking / lifting / lowering arrangement.
Intrinsically safe earthing mechanism.
Programmable Logic Control with Human Machine Interface is provided.
Compact design.
Differential pressure gauge across finger bag can be provided as an option.

Technical Specification

Model	FBD 30	FBD 60	FBD 120	FBD 150	FBD-200	FBD 250	FBD 300
Gross Capacity - Ltrs	100	195	425	510	625	800	1000
Working Capacity - Ltrs	70	140	300	355	440	560	700
Capacity of Dryer - kg	30	60	120	150	200	250	300
Blower Motor - HP	7.5	15	20	25	30	30	40
Steam Consumption @ 3-4 kg/sq.cm Pressure	75-85	150-160	200-215	225-240	250-265	275-300	300-325
Electrical Heater Capacity - KW	36	72	90	NA	NA	NA	NA
Net. Weight - Base Machine only	400	650	900	950	1650	1750	2140
Length (L)	1170	1625	1930	1930	2060	2220	2220
Width (W)	1130	1485	1750	1760	2190	2385	2400
Height (H)	2400	2670	3070	3470	3475	3780	4050
BH (Product Container Height)	910	1120	1310	1410	1460	1535	1635

Fluid Bed Processor (FBP)

The Fluid Bed Processor (FBP) is a versatile pharmaceutical processing system designed to perform drying, granulation, and coating within a single machine. By utilizing controlled airflow and precise process parameters, it ensures uniform heat transfer, efficient moisture removal, and consistent product quality.

Manufactured by Propel Engipharma Pvt. Ltd., our Fluid Bed Processor is engineered in accordance with cGMP standards and built using high-quality stainless steel for superior hygiene, durability, and reliability. It offers high process efficiency, reduced processing time, low energy consumption, and easy operation, making it an ideal solution for pharmaceutical, nutraceutical, food, and chemical industries.

Designed for consistent performance and flexible production requirements, our Fluid Bed Processor delivers reliable, safe, and efficient processing for modern manufacturing environments.

Technical Specification

Model	FBP15	FBP30	FBP60	FBP120	FBP200	FBP300	FBP400	FBP500
Container Gross Volume Ltrs.	46	71	142	280	475	650	870	1142
Max. Batch Capacity (0.5 bd) Kg.*	0 - 15	20 - 30	40 - 60	80 - 120	160 - 200	200 - 300	300 - 400	400 - 500
Blower Motor HP*	7.5	7.5	12.5	25	30	40	50	60
Air Flow (CFM) + 10%	530	765	1060	2150	2600	3500	3900	4500
Steam Pressure (Kg/cm²)	3.5
Steam Consumption (kg/hr)	36	54	81	144	198	260	292	323
Electric Heater (KW)	18	22	36	60	NA	NA	NA	NA
Compressed Air Pressure (bar)	8
Drying Temp (°C)	35 - 80
Electrical Supply**	415V ± 10%, AC, 3Ø, 50 HZ

Key Features

Multi-functional operation: drying, granulation, and coating
cGMP-compliant hygienic design
SS 316L product contact parts
Uniform airflow for efficient processing
PLC & HMI automation (optional)
WIP/CIP system (optional)
Easy filter bag shaking mechanism
Low maintenance and energy-efficient operation
User-friendly operation with enhanced safety features

Auto Coater

Propel Auto Coater is a high-performance pharmaceutical coating system designed for the uniform coating of tablets, pellets, and granules. Engineered with advanced process technology and cGMP-compliant construction, the system delivers consistent coating quality, improved process efficiency, and reliable batch-to-batch performance.

Salient Features

cGMP-compliant design with SS 316 product contact parts
Uniform coating through optimized spray and airflow distribution
High coating efficiency with reduced process time
PLC-HMI based automation with recipe management (optional)
Peristaltic dosing pump for precise coating solution delivery
Automatic spray gun control with anti-bearding arrangement
Efficient hot air handling and exhaust filtration system
Easy cleaning and maintenance with CIP provision (optional)
Suitable for aqueous, solvent-based, film, sugar, and enteric coating
Designed for safe, reliable, and energy-efficient operation

Applications

Film Coating, Sugar Coating, Enteric Coating, Functional Coating & Moisture Protection Coating.

Technical Specification

Model	PEAC -18	PEAC - 24	PEAC - 36	PEAC - 48	PEAC - 60
Capacity - KG	3 to 5	10 to 12	50 to 60	120 to150	300
Interchangeable Pans	12" & 8"	18"	30", 24", & 18"	36"	NA
Pan Motor HP	0.5	1.5	3	5	7.5
Pan RPM	2 to 24	2 to 18	2 to 15	2 to 11	2 to 10
Inlet Blower HP	2	3	3	5	15
Exhaust Blower HP (For Wet Scrubber)	5	7.5	10	20	30
Scrubber Pump HP	1	1.5	1.5	2	3
WIP Pump	1	1	1	1	1
No. of Spray Guns	1	2	2	3	6
Compressed Air Consumption - CFM @4-5 kg/sq.cm	10 to 12	10 to15	25 to 30	40 to 45	80 to 85
Electrical Heat Load - KW	12	12	36	-	-
Steam Consumption - kg/hr@2-3 kg/sq.cm.	35-45	45-55	70-80	120-130	200-210
Dimension - MM (LxWxH) Approx.	835 x 890 x 1460	1240 x 1125 x 1500	1350 x 1450 x 1600	1680 x 2200 x 2225	1985 x 2360 x 2545
Net Weight- Approx.	400	500	900	1200	1800

Conventional Coater

Conventional Coating Pan are used for coating of tablets and drying them simultaneously by hot air from the blower.

Technical Details

Models Available	12", 18", 24", 36", 48" and 60"

Salient Features

Pan with sanitary design.
Excellent tablet rolling with welded baffle.
Machine equipped with hot blower for feeding hot air at temperature range of 40°C to 80°C.
Digital temperature controller provided for easy selection of required temperature.
Damper provided for inlet air control.
Variable frequency drive for speed variation can be provided as an option.
Solution preparation tank with peristaltic pump and spray gun / nozzle car can be provided as an option.
Adjustment of spray guns (optional) and quick dismantle.
Adjustment angle of pan.

Technical Specification

Model No.	PECC 18	PECC 24	PECC 36	PECC 48	PECC 60	PECC 72
Working Capacity (In Kgs)	2 to 10	10 to 25	40 to 70	80 to 150	100 to 210	150 to 275
PAN Mouth Dia. (in mm)	250	300	425	500	500	500
PAN Speed RPM	5 to 24	5 to 24	5 to 24	5 to 24	5 to 24	5 to 24
Man Drive H.P	1 H.P	1 H.P	3 H.P	3 H.P	5 H.P	5 H.P
Inlet Blower H.P	0.5	1 H.P	5 H.P	5 H.P	7.5 H.P	7.5 H.P
Inlet Blower CFM	400	400	1800	1800	2600	3500
Out Let Blower H.P	1 H.P	1 H.P	1 H.P	2 H.P	5 H.P	10 H.P
Compressed Air BAR	6	6	6	6	6	6
Power Supply	415V ± 10%, 3 Phase, AC

Granulation Equipments

Rapid Mixer Granulator (RMG)

Fluid Bed Dryer (FBD)

Fluid Bed Processor (FBP)

Auto Coater

Conventional Coater

Extruder & Spheronizer

Quick Links

Our Services

Official Info